Products from IGP
No results were found for the filter!
EK 10383 Label Adhesive
‘Adhesion/coating of paper labels’ EK 10383 is a solvent-free adhesive especially suited to the adhesion of paper labels. Coating the label with EK 10383 provides transparent protection from the elements. EK 10383 can also be used to...
EK 10383/55 Label Adhesive
‘For difficult surfaces’ EK 10383/55 is a solvent-free adhesive for gluing labels but can also be used as a weather-resistant coating. Unlike EK 10383, EK 10383/55 can also be used for the adhesion of difficult surfaces such as...
AFL 25756/7 Inorganic Surface Adhesive
‘Adhesion of veneer and fire protection panels - negative fire load’ Inorganic surface adhesive AFL 25756/7 is suitable for coating inorganic base panels with veneer or high-pressure laminate finishes. AFL 25756/7 partially compensates...
G 8034 Primer
‘Hybrid technology / binding ceramic - metal’ G 8034 is a solvent-free, special liquid primer for pre-treating problematic surfaces. The product can be applied with standard tools such as brushes, rollers, spongers or cup guns. It...
G 25847 Primer
‘For difficult surfaces’ G 25847 is a solvent-free, liquid primer for pre-treating problematic surfaces. The product can be applied with standard tools such as brushes, rollers or cup guns. It provides excellent adhesion between...
G 25847/2 Primer
‘Plaster primer’ G 25847/2 is a solvent-free, liquid primer for pre-treating mineral surfaces. The product can be applied with standard tools such as brushes, rollers or cup guns. It provides excellent adhesion between cement-based and...
HTP 18499 High-Temperature Sealing Paste
‘Residual elasticity up to 600°C’ HTP 18499 is a paste-like, solvent-free product that is used as a sealant and adhesive in various technical areas in ongoing temperatures up to 600°C. Once cured, this product provides a ductile...
HTP 23998 High-Temperature Sealing Paste
‘Seals in high-temperature areas’ HTP 23998 is a solvent-free high-temperature sealant paste that is especially used as a sealant and adhesive in areas with ongoing temperatures up to 1,100°C. The product is suitable for the...
MK 25865 Structural Adhesive
‘Extreme adhesion’ MK 25865 is a paste-like, solvent-free, single-component structural adhesive with very good initial adhesion on various surfaces. The product is especially well suited to the rapid securing/adhesion of skirting boards...
NTKM 14822 Low-Temperature Mouldable Adhesive...
‘Securing cast components’ NTKM 14822 is a plastic mouldable putty with temperature stability up to approx. 300°C that can be used to temporarily secure casting technology components.
SK 25808 Spray Adhesive
‘Sprayable adhesive for foam’ SK 25808 is a solvent-free adhesive with a high level of initial adhesion that can be applied using various spraying methods. It is particularly well suited to installing foam mats on various surfaces or...