High-temperature adhesives (technically: high-temperature adhesives) are special adhesives that can withstand extreme temperatures and permanently bond materials such as metal, ceramic or glass.

Sodium silicate, also known as sodium silicate, is an inorganic binder. It serves as the basis for many of our high-temperature and fire-resistant adhesives and is fire-resistant and non-combustible.

A fire-resistant coating for interior use reliably protects components from fire and extreme heat by forming an insulating protective layer in the event of a fire. This ensures the structure remains functional longer and further extends its service life.

Our high-temperature adhesives are resistant to temperatures well over 1000°C, depending on the product, making them the perfect solution for extreme operating conditions. While conventional plastics fail at significantly lower temperatures, our specialty adhesives retain their strength and reliability even under the most extreme heat.

Yes, our fire protection adhesives are non-flammable and specially developed for use in fire-resistant structures.

In the area of fire protection, our adhesives and coatings are tested according to the relevant standards DIN EN 13501-1 and DIN 4102. Depending on the application, we also use other recognized standards and test methods to comprehensively guarantee the quality and safety of our products.

A water glass adhesive is based on sodium silicate. It is an inorganic silicate adhesive characterized by high temperature resistance and fire resistance.

The surface must be clean, free of grease, and dry. The adhesive is then applied evenly and cured according to the data sheet.

Commercially available squeegees for cartridges, as well as spatulas or squeegees, are suitable for applying the adhesive evenly.

Depending on their composition, our products are resistant to temperatures up to over 1000 °C.

Our non-combustible mineral foam is a high-quality fire protection foam that does not intumesce but is immediately effective due to its mineral composition.

In the event of a fire, it does not provide any additional fuel but forms a heat-resistant barrier that repels fire and high temperatures.

For fire protection boards, we recommend high-quality water glass-based fire protection adhesives that are tested according to DIN EN 13501-1 or DIN 4102.

These adhesives ensure a secure, permanent bond and meet the highest requirements for structural fire protection.

They are particularly suitable for the installation of calcium silicate boards, gypsum fiber boards and other non-combustible building boards because they are temperature-resistant, low-emission and easy to process.

Fire-resistant adhesives based on water glass are predominantly used in furnace construction. They are designed for high temperatures and can withstand long-term stress.

You can order our products directly by email or phone. We'd be happy to advise you on your application in advance.

Yes, we provide samples or specimens for testing purposes upon request.

Delivery times depend on the product and workload. Standard products are generally available quickly, while special solutions have individual delivery times.

Yes, we supply customers in Germany, Europe and worldwide.

Our loading times are:

Mo.-Do.: 06:00-14:00Uhr

Fri: 6:00-11:00

You can contact us during office hours:

Mon-Thurs: 7:00-15:30

Fri: 7:00-13:00

or 24 hours a day via form or email.

Many of our adhesives and coatings are solvent-free, low-emission, and sustainably produced.

IGP Chemie GmbH is ISO 9001 (Quality Management) and ISO 14001 (Environmental Management). This guarantees the highest standards of quality, sustainability, and environmental protection in the development and production of our high-temperature adhesives and coatings.

Silicate adhesives are inorganic, fireproof, and non-combustible. They offer very high temperature resistance and are ideal for fire protection.